Marker Tie, Wrap Style, 7.4 Inches (188 mm) Length, Standard, Nylon, Natural. For indoor use. Used to fasten and identify bundles at the same time. One-piece construction for consistent performance and reliability. Can be marked with Panduit marker pens or custom imprinted with text, symbols. or trademarks available using Panduit Custom Hot Stamping Service. Curved tip is easy to pick up from flat surfaces and allows faster initial threading.

MINI-BEAM: Retro; Range: 5 m; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 2 m (6.5 ft) cable Banner Engineering

MINI-BEAM: Emitter; Range: 30 m; Input: 24-240 V ac; Output: Not Applicable; 2 m (6.5 ft) Cable Banner Engineering

Cable Tie, 2-Piece, 14.7 Inches (375 mm) Length, Intermediate, Black. Weather Resistant for greater resistance to damage caused by ultraviolet light. Indoor or outdoor use. Used for normal bundling and through-panel applications. Small head height allows more efficient use of space in compact areas. Exclusive two-piece design offers the lowest threading force in the industry. Average 14 percent lighter than one-piece cable ties. Releasable prior to final tensioning for bundle modifications.

Cable Tie, 2-Piece, 14.7 Inches (375 mm) Length, Intermediate, Nylon, Natural. For indoor use. Used for normal bundling and through-panel applications. Small head height allows more efficient use of space in compact areas. Exclusive two-piece design offers the lowest threading force in the industry. Average 14 percent lighter than one-piece cable ties. Releasable prior to final tensioning for bundle modifications.

MINI-BEAM: Emitter; Range: 30 m; Input: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) cable Banner Engineering

The C125X030FJC Network Component P1 label cassette includes both label material and ribbon to make changing labels easy. Die-cut labels designed to provide maximum quality for identifying patch panels, faceplates, punch-down blocks, and other network systems hardware. Temperature Range: -40°F to 180°F (-40°C to 82°C). Compatible with Panduit Easy-Mark Plus Labeling Software. Polyolefin material. Network label, P1 cassette, 1.25" W x 0.30" H, polyolefin, white, 200 labels/cassette, 1 pc. package quantity.

Laser/Ink Jet, Component Label, Adhesive Polyester, 0.60 Inch Wide x 0.20 Inch High, White, Labels can be printed in both laser and ink jet printers, Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware, Die-cut labels designed to provide maximum aesthetic quality and appearance, Available in adhesive polyolefin and non-adhesive polyester materials.

ECONO-BEAM: High Speed Emitter; Input: 10-30 V dc; Output: Not Applicable; MHS Response Time = 1 ms; 2 m (6.5 ft) Cable Banner Engineering

MINI-BEAM: Diffuse; Range: 380 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 2 m (6.5 ft) cable Banner Engineering

MINI-BEAM: Receiver; Range: 30 m; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; 2 m (6.5 ft) cable Banner Engineering

Thermal transfer component label, 0.25" W x 0.25" H, polyimide, white, 12 labels/row, 10,000 pc. package quantity.

The BT2S-M Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Standard cross section, 8.0” (203mm) length. Appropriate for Indoor use, made of Nylon 6.6, are natural in color and come in packages of 1000.

The EP710 Series optical multimeters pack both a light source and an optical power meter (OPM) in a single handheld unit. These palm sized testers are ideal for numerous optical test applications, including CATV, FTTx, and PON networks. The visual fault locator enables the user to quickly locate faults in the fiber, making it the perfect tool for installation and maintenance of optical distribution networks.

The AE100 series of optical power meters are perfect for installation and verification of fiber optics networks. These miniature units fit in even the smallest of test locations, enabling users to run optical loss tests, which is a basic test required for all turn-up and maintenance of optical networks.

The LS310 series of compact optical power meters are perfect for qualifying applications using fiber optics for the physical layer, including FTTx, CATV, PON and long haul networks. These user-friendly instruments are capable of supporting up to 5 wavelengths, covering all required wavelengths needed for the applications listed above.

The AE210 series of compact light sources are perfect for qualifying applications using fiber optics for the physical layer, including FTTx, CATV, PON and long haul networks. These user-friendly instruments are capable of supporting up to 5 wavelengths, covering all required wavelengths needed for the applications listed above.

The OM6200 is a portable, new generation optical power meter offers a wide measurement range, high accuracy and resolution, insertion loss testing, and good cost-performance. The OM6200 is customized to support optical power measurement of multiple wavelengths between 850nm and 1650nm.

The EP350 is a 10G-PON Optical Power Meter equipped with high-resolution photodetectors to make single-wave and pass-through measurements for upstream and downstream signals. For upstream signals, it can also perform burst light power measurement. With Wi-Fi and USB connectivity, you can remotely run tests, examine data, upload results, and more - all from your mobile device. The EP330 series is ideal for GEPON, XG(S)-PON and 10GE-PON line detection and maintenance.

The EP330 series is a NG-PON2 Optical Power Meter equipped with high-resolution photodetectors to make single-wave and pass-through measurements for upstream and downstream signals. For upstream signals, it can also perform burst light power measurement. With Wi-Fi and USB connectivity, you can remotely run tests, examine data, upload results, and more - all from your mobile device. The EP330 series is ideal for G-PON and NG-PON2 line detection and maintenance.

The AE2200 is the ultra-portable, multi-function validation solution for FTTx, RFoG and RF PON installations. Engineered to address the requirements of CSPs, the AE2200 is flexible meter that integrates cable TV analysis, metallic TDR testing and optical testing, including a fiber scope, optical time domain reflectrometer (OTDR), optical power meter, visual fault locator and light source. Users can easily verify optical links with the FiberPath™ link mapping tool, which reduce the need for OTDR trace interpretation.

The AE1001 is a sleek, zero-fuss OTDR weighting less than 1kg that tests the common 1310nm and 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500 mAh battery allows the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the handy OPM and VFL.

The EP80A is a handheld PON protocol analyzer with built-in ONU (Optical Network Unit) allowing users to read PON authentication codes to diagnose the operation between Optical Line Terminal (OLT) and ONU in EPON/GPON network.

The AE919 series Multi Optical Meter brings the best in optical fiber network evaluation. AE919 equips with all functions needed for fiber installation, deployment, and maintenance in FTTH + IP and FTTH + RF projects. Customizable models and configurable options ensure your unique measurement needs are covered.
FTTH + IP includes IPTV, ONU, FiberPath™ link mapping
FTTH + RF includes QAM, ONU, TDR, FiberPath™ link mapping

Sticklers™ CleanWipes fiber optic wipes are ideal for bare fiber and end-face cleaning

Applications:
- Ideal for cleaning bare fiber and fiber optic connector end-faces
- Cleans bare fiber before splicing
- Use for delicate optical cleaning chores, such as cleaning optical devices, microscopes, inspection equipment and maintaining smaller tools
- Cleans lenses, mirrors, diffraction gratings, prisms and test equipment
- Use for cleaning small tools and devices
- Ideal for benchtop or general cleaning
- Makes wet/dry cleaning simple with the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid

Features:
- Premium super-soft, streak-free, and lint-free wipes
- Single use only, do not reuse wipes to prevent cross-contamination
- Electrostatic-dissipating to remove triboelectric charging
- Smooth, white wipe
- No glues, bleach or cellulose to re-deposit onto an end-face
- Very strong modulus fabric wipes - resist shredding and tearing, even on LC connector end-faces
- These fiber optic wipes are high absorbency
- Each wipe is 4" x 4" (100 x 100 mm)
- Clean room packaging - a small, flat plastic bag
- 50 wipes per bag; 50 bags per case, 2,500 wipes/case
- NATO SN #6850-99-152-3398

Sticklers™ CleanWipes 600 has a portable cleaning box to fit nicely in a tool box

Applications:
- Ideal for cleaning fiber optic jumpers and connector plugs
- Makes wet/dry cleaning simple with the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid
- Removes fingerprints, oils, grime, polishing compound, dust and lint
- Cleans SC and LC duplex connectors without disassembly

Features:
- The six CleanWipes 600 slots are color-coded to help techs remember which slots they have already used
- Slots accept LC and SC duplex connectors
- The tech never touches the wipe and never re-uses the wipe to reduce cross-contamination
- Premium super-soft, streak-free, and lint-free wipes
- Electrostatic-dissipating to remove triboelectric charging
- Smooth, white wipe
- No glues or bleach to re-deposit onto an end-face
- Very strong modulus fabric wipes - resist shredding and tearing, even on LC connector end-faces
- High absorbency
- Each wipe is 2" x 4.25"
- 100 wipes per box to wet/dry clean 600 fiber end-faces

This Sticklers fiber optic splice and connector cleaner is a better, safer IPA replacement

Applications:
- Excellent IPA (Isopropyl Alcohol) alternative
- Cleaning fiber optic end faces
- Use on Ceramic and composite ferrule faces
- Cleaning fiber during fusion splicing
- Cleans glass and plastic lenses

Features:
- Completely removes dust, dirt, fingerprints, moisture
- Ultra-pure, leaves no residue
- Does not absorb water or other impurities
- Metered doses help control waste
- Nonflammable for added safety
- Dissipates electrostatic charge
- Dries instantly for faster cleaning
- Safe on all surfaces
- TravelSafe™ bottle - ships as non-hazardous, non-regulated for easy storage and transport
- Hermetically sealed and spill-proof
- RoHS and REACH compliant
- NSN: 6850-01-592-9391

Sticklers™ Fiber Optic Splice & Connector Cleaner out-performs alcohol, and enhances the cleaning efficiency of any wipe, swab or cleaning tool.

Features
1. Safety and reliable
Compared with traditional alcohol or cotton stick cleaning, JWFCC cleaner avoids the
second-hand pollution and ensure the cleaning quality.
2. Easy to use
Without any additional accessories, just gently wipe the connector off the cleaning slot,
then it is clean.
3. Cost saving
Compared with similar imported cleaners, this price is very competitive.
The lifespan is more than 500 times cleaning.
4. Replacement tape
Cleaning tape is removable.
5. Wide Application
Widely used in field or in-door researching institution instrument cleaning.

FK08 - Sticklers High-Volume Fiber Optic Cleaning Kit has everything for 2,300+ cleanings

Features:
The kit contains no hazardous materials and can be shipped anywhere in the world by ground, air or sea without restrictions

Kit Includes:
- 1 - 2.5mm “push-to-clean” CleanClicker™ fiber optic connector cleaner for cleaning the most contaminated ports including SC, FC, ST, E2000, MIL DTL 83526 & OptiTap connectors
- 1 - 1.25mm 'push-to-clean' CleanClicker fiber optic connector cleaner for cleaning LC, MU, SFP+, ODC, CS ARINC801, NGCON & LUXCIS connectors
- 2 - Sticklers™ nonflammable cleaning fluid, with 650+ cleanings in each can
- 90 - CleanWipes™ 90 benchtop wipes, with 90+ cleanings
- 1 - CleanWipes™ 600 lint-free wipes box, with 600+ cleanings
- 25 - CleanWipes™ Singles for use in harsh environments, for 25+ cleanings
- 20 - 1.25mm CleanStixx™ fiber optic cleaning sticks, for exactly 20 cleanings
- 30 - 2.5mm CleanStixx™ fiber optic cleaning sticks, for exactly 30 cleanings
- 1 - durable and easy-to-find bright orange fabric bag

Each kit features the unique Sticklers™ Fiber Optic Splice & Connector nonflammable cleaning fluid that replaces IPA alcohol and makes 'wet-dry' cleaning a snap. The Sticklers™ High Volume Fiber Optic Cleaning Kit delivers clean, reliable fiber and avoids time-wasting re-cleaning. Plus, it minimizes expensive repair visits.

FK03 - The Sticklers™ Standard Fiber Optic Cleaning Kit is optimal for general installations or enterprise environments

Features:
This standard fiber optic cleaning kit contains no hazardous materials and ships anywhere in the world by ground, air or sea without restrictions

Kit Includes:
- 2 - Sticklers™ nonflammable cleaning fluid, with 650+ cleanings in each can
- 90 - CleanWipes™ 90 benchtop wipes, with 90+ cleanings
- 1 - CleanWipes™ 600 lint-free wipes box, with 600+ cleanings
- 25 - CleanWipes™ Singles for use in harsh environments, for 25+ cleanings
- 20 - 1.25mm CleanStixx™ fiber optic cleaning sticks, for exactly 20 cleanings
- 30 - 2.5mm CleanStixx™ fiber optic cleaning sticks, for exactly 30 cleanings
- 1 - durable and easy-to-find bright orange fabric bag

Each kit features the unique Sticklers™ nonflammable cleaning fluid that replaces IPA alcohol and makes 'wet-dry' cleaning a snap. They also feature the best-selling CleanWipes™ 90 for benchtop cleaning, giving techs the lowest cost-per-cleaning without lint, fibers or dust getting on the end-faces. This eliminates time-wasting re-cleaning and minimizes expensive repair call-outs. With this kit the time-saving Sticklers™ cleaners are in a “go anywhere, clean anything” package, giving every tech all the tools they need to get the job done right the first time.

The CleanWipes Singles Outdoor Fiber Optic Wipes are for use in harsh environments
25 packets/bag

Applications:
- Engineered for cleaning fiber end-faces in harsh environments
- Ideal for wet/dry cleaning using Sticklers™ Fiber Optic Splice & Connector Cleaning Fluid

Features:
- Hermetically-sealed against wind, rain, snow, dust storms, etc.
- Super-strong, high-purity, lint free fiber optic wipes
- Each wipe stays clean and dry in an envelope until opened
- CleanWipes Singles are made with lint-free polyester fabric
- Resist shredding and tearing, even on LC end-faces
- The wipes contain no cellulose which might contaminate surfaces and no glues that might scratch end-faces
- Each wipe cleans up to six connector end-faces
- Fits into tool boxes and pockets

With just one click the 2.5mm CleanClicker™ from Sticklers™ gets connectors clean

Applications:
- Cleans SC/UPC, SC/APC, ST, FC/APC, FC/UPC, E2000/UPC and E2000/APC connectors
- Also cleans some hardened 2.5 mm connectors
- Use to clean OptiTap® connectors

Features:
- 750+ speedy cleans in each tool
- High purity cleaning strand removes dust, particulate and oil contamination
- Pen-style tool cleans 90% of all connectors with just a single click instead of 2-4 clicks
- Gentle activation will not damage end-faces during cleaning
- Long throw, so more cleaning ribbon is used on every activation for better cleaning with every click
- Long barrel length to fit inside high fiber-count panels without disrupting the adjacent connectors
- Use for wet/dry cleaning of heavily soiled connectors with the Sticklers™ Fiber Optic Splice & Connector Cleaner Cleaning Fluid
- Refill cartridges perform 750+ cleanings, with a 30% savings over the cost of a new cleaner

VFL6500 Series Mini Visual Fault Locator
It provides a stable visible red light for users to easily locate fiber faults, broken or micro-bend in installation or maintenance of optical network. With the modulation function, it is also applicable for end to end fiber identification.

Features:
• Pocket size and light weight
• Constant and stable output power
• CW or 2H2 modulated signal
• Low battery warning
• Up to 40 hours battery life

Specifications:

Model VFL6500
Central Wavelength (nm) 650mm±10nm
Emitter FP-LD
Output Power (mw) 1mw/10mw/20mw
Connector 2,5mm universal
Modulation (Hz) 2
Battery AAA (2pcs)
Operating Time (hrs) 40
Operating Temperature (0C) -10~+60 (0C)
Storage Temperature (0C) -25~+70 (0C)
Dimension (mm) 100*30*18
Weight (g) 60

The Sticklers™ CleanStixx™ 1.25mm fiber optic swabs are reliable, inexpensive cleaning tools

Applications:
- Use the 1.25mm fiber optic swabs to clean 1.25 mm ports
- Clean LC, MU, ARINC 801 socket termini, ODC-style socket termini, most SPF+ transceiver modules with ferrule stub and lenses interfaces, and other hardened 1.25mm connector systems within adapter and socket termini

Features:
- Patented sintered polymer fibers for consistent, high-purity cleaning
- Ultra clean construction - does not contain fabric, foam, glue or particulate
- Precisely molded to clean the entire end face, not just the central core
- For best results, use with Sticklers™ Fiber Optic Connector Cleaning Fluid that cleans effectively, dissipates static and leaves no residue
- Come in high-purity self-sealing bags
- 50 Swabs per box (10 swabs in 5 self-sealing bags)
- Military-approved
- NSN: #6070-01-553-2267

Sticklers™ CleanWipes 90 Benchtop Wipes are in a convenient dispenser tub

Applications:
- Use on bare fiber before splicing
- Clean fiber optic jumpers and end faces
- Ideal for wet/dry cleaning using the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid

Features:
- Convenient pop-up mini tub
- Unique top prevents tub from rolling
- High quality, optical-grade, lint-free fiber optic wipes
- Made with cloth, not paper to reduce lint
- No glues, bleach or cellulose
- 90 wipes per tub

2.5mm CleanStixx Fiber Optic Swabs get any fiber network running faster and more reliably

Applications:
- Work great on SC, ST, FC, E2000, OptiTap-style ports, MIL DTL 83526 TFOCA style socket termini
- Cleans other 2.5mm hardened connector systems
- Use on fiber optic end faces in ports, mating sleeves or sockets of high-speed fiber optic networks

Features:
- Patented sintered polymer fibers for consistent, high-purity cleaning
- Ultra clean construction - does not contain fabric, foam, glue or particulate to leave residue on end faces
- 2.5mm fiber optic swabs are precisely molded to clean the entire end face, not just the central core or contact zone
- For best results, use with Sticklers™ Fiber Optic Connector Cleaning Fluid that cleans effectively, dissipates static and leaves no residue
- Come in high-purity self-sealing bags
- 50 Swabs per box (10 swabs in 5 self-sealing bags)
- Military-approved
- NSN: #6070-01-553-2263

This Sticklers fiber optic splice and connector cleaner is a better, safer IPA replacement

Applications:
- Excellent IPA (Isopropyl Alcohol) alternative
- Cleaning fiber optic end faces
- Use on Ceramic and composite ferrule faces
- Cleaning fiber during fusion splicing
- Cleans glass and plastic lenses

Features:
- Completely removes dust, dirt, fingerprints, moisture
- Ultra-pure, leaves no residue
- Does not absorb water or other impurities
- Metered doses help control waste
- Nonflammable for added safety
- Dissipates electrostatic charge
- Dries instantly for faster cleaning
- Safe on all surfaces
- TravelSafe™ bottle - ships as non-hazardous, non-regulated for easy storage and transport
- Hermetically sealed and spill-proof
- RoHS and REACH compliant
- NSN: 6850-01-592-9391
- Special Note: the Liter and 4-liter packages use screw-on caps and do not have the Triton™ dispenser

Sticklers™ Fiber Optic Splice & Connector Cleaner out-performs alcohol, and enhances the cleaning efficiency of any wipe, swab or cleaning tool.

This Sticklers fiber optic splice and connector cleaner is a better, safer IPA replacement

Applications:
- Excellent IPA (Isopropyl Alcohol) alternative
- Cleaning fiber optic end faces
- Use on Ceramic and composite ferrule faces
- Cleaning fiber during fusion splicing
- Cleans glass and plastic lenses

Features:
- Completely removes dust, dirt, fingerprints, moisture
- Ultra-pure, leaves no residue
- Does not absorb water or other impurities
- Metered doses help control waste
- Nonflammable for added safety
- Dissipates electrostatic charge
- Dries instantly for faster cleaning
- Safe on all surfaces
- TravelSafe™ bottle - ships as non-hazardous, non-regulated for easy storage and transport
- Hermetically sealed and spill-proof
- RoHS and REACH compliant
- NSN: 6850-01-592-9391

Sticklers™ Fiber Optic Splice & Connector Cleaner out-performs alcohol, and enhances the cleaning efficiency of any wipe, swab or cleaning tool.

This Sticklers fiber optic splice and connector cleaner is a better, safer IPA replacement

Applications:
- Excellent IPA (Isopropyl Alcohol) alternative
- Cleaning fiber optic end faces
- Use on Ceramic and composite ferrule faces
- Cleaning fiber during fusion splicing
- Cleans glass and plastic lenses

Features:
- Completely removes dust, dirt, fingerprints, moisture
- Ultra-pure, leaves no residue
- Does not absorb water or other impurities
- Metered doses help control waste
- Nonflammable for added safety
- Dissipates electrostatic charge
- Dries instantly for faster cleaning
- Safe on all surfaces
- TravelSafe™ bottle - ships as non-hazardous, non-regulated for easy storage and transport
- Hermetically sealed and spill-proof
- RoHS and REACH compliant
- NSN: 6850-01-592-9391

Sticklers™ Fiber Optic Splice & Connector Cleaner out-performs alcohol, and enhances the cleaning efficiency of any wipe, swab or cleaning tool.

Calibrated Wavelength (nm)
mPM-100-7 850, 980, 1300, 1310, 1490, 1550, 1625
mPM-100-5 850, 1300, 1310, 1490, 1550

Measurement Range -60dBm ~ 10dBm
Accuracy +/-0.5dB @-20dBm
Resolution 0.01dB
Display unit dBm, nm
Adapter type Universal 2.5mm Adapter for SC,FC,ST,E2000
Display LCD (with LED backlight), 3 LED indicators
Connector SC/PC (standard)
Operation Mode Power Meter / Insertion Loss Meter
Photodetector type InGaAs
Display 2.1 inch LCD (with LED backlight)
Battery 3.7V Rechargeable Lithium Ion Polymer Battery
Battery Life 3 hours (continuous usage)
Data Storage 100 measurements
External interface micro USB 2.0
Dimension 102 (W) x 32 (H) x 24 (D) mm
Weight 70g

Refill / replacement tape for JWFCC cletop connector cleaner

Features
1. Compact size and easy operation
2. Time and cost saving
3. Up to 800 times cleaning
4. Special Anti-Static Microfiber Fabric witout any residues, Lint and Solvent Free

Model: JW5008125
Applicable: 1.25mm end-faces incl. LC/MU etc.
Housing Material: Plastic
Cleaning Tip: Plastic
Cleaning Fabric: Dry Special Anti-Static Microfiber Fabric
Cleaning Times: Up to 800
Weight: 90g
Dimension (cm) 18,5 x 1,8

Features
1. Compact size and easy operation
2. Time and cost saving
3. Up to 800 times cleaning
4. Special Anti-Static Microfiber Fabric witout any residues, Lint and Solvent Free

Model: JW5008
Applicable: 2.5mm end-faces incl. SC/FC/ST/E-2000 etc.
Housing Material: Plastic
Cleaning Tip: Plastic
Cleaning Fabric: Dry Special Anti-Static Microfiber Fabric
Cleaning Times: Up to 800
Weight: 90g
Dimension (cm) 18,5 x 1,8

Refill for CCU125 1.25mm CleanClicker

Refill cartridges perform 750+ cleanings, with a 30% savings over the cost of a new cleaner

The miniaturized CleanClicker 400 fiber cleaning tool fits into tight spaces and confined areas

Applications:
- Use in tight spaces or confined areas
- Ideal for cleaning down near the floor in a data center or in the inner-most corners of a data center rack
- Remove dust and residue from fiber end faces
- 1.25mm size cleans LC, MU, ODC-style, ARINC801, NECON and other hardened 1.25mm based connector systems
- Ideal for OSP and premises applications, enterprise applications, carrier networks, field inspection kits OEM assembly and research labs

Features:
- This fiber cleaning tool 400+ cleanings
- Compact - only 104 mm (4”) in length for cleaning in confined spaces
- High-purity cleaning ribbon has a long 'throw' which means the tools deliver perfect cleanings with just one click
- Work with just one click, unlike others that need 2-4 clicks to deliver clean end faces, to save money
- Easily and quickly remove dust, particulate and oil contamination
- For wet/dry cleaning of heavily soiled end faces, use with Sticklers Fiber Optic Slice and Connector Cleaner Cleaning fluid

1.25mm CleanClicker 750 click-to-clean tool delivers speedy cleaning with a single click

Applications:
- Use this click-to-clean tool on LC/UPC, LC/APC, MU/UPC, MU/APC connectors
- Also works on some hardened 1.25 mm connectors
- Use on outside plant and premise networks
- Cleans most ferrule stub and lens-based SPF+ transceivers, both in and out of adapters

Features:
- 750+ speedy cleans in each tool
- High purity cleaning strand removes dust, particulate and oil contamination
- Pen-style tool cleans 90% of all connectors with just a single click instead of 2-4 clicks
- Gentle activation will not damage end-faces during cleaning
- Long throw, so more cleaning ribbon is used on every activation for better cleaning with every click
- Long barrel length to fit inside high fiber-count panels without disrupting the adjacent connectors
- Use for wet/dry cleaning of heavily soiled connectors with the Sticklers™ Fiber Optic Splice & Connector Cleaner Cleaning Fluid
- Refill cartridges perform 750+ cleanings, with a 30% savings over the cost of a new cleaner

Refill for CCU250 2.5mm CleanClicker™ from Sticklers™

Refill cartridges perform 750+ cleanings, with a 30% savings over the cost of a new cleaner

The keyless CleanClicker 600 MPO connector cleaner allows up or down cleaning

Applications:
- Ideal for high-density network applications such as in data centers, telco central offices and cable TV head ends
- Cleans all compliant IEC 61754-7 and TIA604-5 FOCIS 5 MT-based connector systems
- Works on most brands of multi-fiber connectors
- Use on flat polished multimode connectors and angled single-mode connectors
- Cleans adapters and truck assemblies

Features:
- 'Keyless' cleaning tip allows up or down insertion
- Remove the tip insertion orientation key and the tool cleans inverted - makes cleaning in tight spaces or near floors or ceilings much easier
- 600+ cleanings in each tool
- Cleans both male (with guide pins) and female (without guide pins) MPO connectors
- Enables wet-dry cleaning on heavily soiled end faces, use with the Sticklers Fiber Optic Splice & Connector Cleaner Cleaning Fluid
- Translucent plastic housing shows the tech how much cleaning ribbon remains - avoids surprises out in the field

The MPO connector cleaner adapter set allows the Connector Cleaner to work on hardened connectors. These include the Commscope HMFOC, and the Corning Optitip. Each adapter is keyed for one way insertion and perfect alignment.

The BT1M-C Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Miniature cross section, 4.0” (102mm) length. Appropriate for Indoor use, made of Nylon 6.6, are natural in color and come in packages of 100.

The BT1M-M Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Miniature cross section, 4.0” (102mm) length. Appropriate for Indoor use, made of Nylon 6.6, are natural in color and come in packages of 1000.

The BT3LH-TL0 Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Light-Heavy cross section, 11.8” (300mm) length. Appropriate for Indoor/Outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 250.

The BT3LH-L0 Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Light-Heavy cross section, 11.8” (300mm) length. Appropriate for Indoor/Outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 50.

The BT3S-M0 Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Standard cross section, 12.0” (305mm) length. Appropriate for Indoor/Outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 1000.

Cable Tie, 5.6 Inches (142 mm) Length, Intermediate. Distinctive Green Color. Polypropylene material for chemical resistance where high loop tensile strength is not required especially in the presence of hydrochloric acid, salts and bases. For indoor use. Material requires lowering the tool setting (see package label). One-piece construction for consistent performance and reliability. Low thread force. Curved tip is easy to pick up from flat surfaces and allows faster initial threading.

Panduit PLT1.5M-C0 Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Miniature cross section, 5.6" (142mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

Marker Tie, Wrap Style, 3.9 Inches (99 mm) Length, Miniature, Nylon, Yellow. For indoor use. Used to fasten and identify bundles at the same time. One-piece construction for consistent performance and reliability. Can be marked with Panduit Marker Pens (sold separately) or Custom imprinted with text, symbols or trademarks available using Panduit Custom Hot Stamping Service. Curved tip is easy to pick up from flat surfaces and allows faster initial threading.

Panduit PLT1M-M30 Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Miniature cross section, 3.9” (99mm) length. For Indoor use and high temperature applications, made of heat stabilized Nylon 6.6, are black in color and come in packages of 1000.

Cable Tie, 14.5 Inches (368 mm) Length, Light-Heavy, 120 Pounds Minimum Loop Tensile Strength, Nylon 6.6, Green. Material Flammability Rating of V-2. For indoor use. One-piece construction for consistent performance and reliability. Low thread force.

Panduit PLT4I-M0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 14.5" (368mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 1000.

Panduit PLT4S-C76 Tefzel locking cable ties are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. Ideal for use in nuclear power facilities and chemical processing plants. Low smoke density and excellent flammability rating of UL 94V-0. Standard cross section, 14.6” (371mm) length. For indoor or outdoor use, made of Tefzel, are a distinctive aqua blue in color and come in packages of 100.

Panduit PLT7LH-C30 Locking Cable Ties are designed to satisfy the needs of high temperature applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Light-Heavy cross section, 24.7” (627mm) length. Made of Heat Stabilized Nylon 6.6, are black in color and come in packages of 100.

Panduit PRWP1.5S-D Releasable Wing Push Mount Ties use an all-in-one design to attach bundles to another surface using a stable, secure, rattle-free installation. Extended release tab permits easy release and re-use where changes are anticipated during development, production or servicing in the field. Standard cross section, 6.8” (173mm) length. For indoor use, made of Nylon 6.6, are natural in color and come in packages of 500.

Cable Tie, 3.9 Inches (99 mm) Length, Miniature. Distinctive Green Color. Polypropylene material for chemical resistance where high loop tensile strength is not required especially in the presence of hydrochloric acid, salts and bases. For indoor use. Material requires lowering the tool setting (see package label). One-piece construction for consistent performance and reliability. Low thread force. Curved tip is easy to pick up from flat surfaces and allows faster initial threading.

Panduit PLT2S-M30 Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section 7.4” (188mm) length. For Indoor use and high temperature applications, made of heat stabilized Nylon 6.6, are black in color and come in packages of 1000.

Cable Tie, 2-Piece, 8.1 Inches (206 mm) Length, Intermediate, Nylon, Natural. For indoor use. Used for normal bundling and through-panel applications. Small head height allows more efficient use of space in compact areas. Exclusive two-piece design offers the lowest threading force in the industry. Average 14 percent lighter than one-piece cable ties. Releasable prior to final tensioning for bundle modifications.

Cable Tie, 14.5 Inches (368 mm) Length, Light-Heavy, 120 Pounds Minimum Loop Tensile Strength, Nylon 6.6, Yellow. Material Flammability Rating of V-2. For indoor use. One-piece construction for consistent performance and reliability. Low thread force.

Panduit PLT4S-M2 Locking Cable Ties are designed to satisfy the needs of mil spec applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Standard cross section, 14.5" (368mm) length. Made of Nylon 6.6, are red in color and come in packages of 1000.

Cable Tie, 17.5 Inches (445 mm) Length, Standard, 50 Pounds Minimum Loop Tensile Strength, Nylon 6.6, Red. Material Flammability Rating of V-2. For indoor use. One-piece construction for consistent performance and reliability. Low thread force. Curved tip is easy to pick up from flat surfaces and allows faster initial threading.

The BT1.5I-M0 Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Intermediate cross section, 6.1” (155mm) length. Appropriate for Indoor/Outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 1000.

The BT4S-C Dome-Top® barb ty, features a unique patented design with its round smooth edges. Paired with the stainless-steel locking barb, these cable ties provide consistent performance, reliability and infinite adjustability through the entire bundle range. Standard cross section, 15.1” (384mm) length. Appropriate for Indoor use, made of Nylon 6.6, are natural in color and come in packages of 100.

Panduit PLT.7M-M0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Miniature cross section, 3.1" (79mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 1000.

Panduit PLT10EH-C0 Lashing Cable Ties are ideal for heavy duty applications. Extra-Heavy cross section, 34.2” (869mm) length. For Indoor or outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

Panduit PLT4H-TL Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Light-Heavy cross section, 14.5" (368mm) length. Made of Nylon 6.6, are natural in color and come in packages of 250.

Panduit PLT4I-M30 Locking Cable Ties are designed to satisfy the needs of high temperature applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 14.5" (368mm) length. Made of Heat Stabilized Nylon 6.6, are black in color and come in packages of 1000.

Pan-Ty® Colored Cable Ties - Standard; Application: General; Color: Blue; Cross Section: Standard; Environment: Indoor, Indoor, Plenum; Head Height (In.): 0.22; Head Height (mm): 5.6; Head Width (In.): 0.34; Head Width (mm): 8.6; Locking Style: Locking; Material: Nylon 6.6; Maximum Bundle Diameter (In.): 5; Maximum Bundle Diameter (mm): 127 Millimeters; Min. Loop Tensile Strength Lbs. (N): 50 (222); Minimum Bundle Diameter (In.): 0.06 Inch; Minimum Bundle Diameter (mm): 1.5 Millimeters; Minimum Loop Tensile Strength (lb): 50 Pound; Minimum Loop Tensile Strength (N): 222 Newton; Overall Length (In.): 17.5 Inch; Overall Length (mm): 445 Millimeters; Overall Width (In.): 0.19 Inch; Overall Width (mm): 4.8 Millimeters; Product Type: Cable Ties; Releasable: 0; Thickness In (mm): 0.05 (1.3); Package Quantity: 1000

Panduit PRT6EH-C0 Releasable Lashing Cable Ties have a release tab that permits easy release where changes are anticipated during development, production or servicing in the field. Ideal for heavy duty applications. Extra-Heavy cross section, 22.2” (564mm) length. For Indoor or outdoor use, made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

The CCAL1H1013-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 10–13mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H1316-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 13–16mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H1619-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 16–19mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H1923-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 19–23mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H2327-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 23–27mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H3238-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 32–38mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H3846-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 38–46mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H4651-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 46–51mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL1H5157-X One-Hole Aluminum Cable Cleat is ideal for lower to medium short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 93.4kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 51–57mm and installs direct to the cable tray rung via fixing hole and user-supplied M10 bolt. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H109120-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 109-120mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H3846-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 38-46mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H4658-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 46-58mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H5870-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 58-70mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H7083-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 70-83mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H8397-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 83-97mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.

The CCAL2H97109-X Two-Hole Aluminum Cable Cleat is ideal for medium to high short circuit faults in less corrosive environments. The cable cleat is certified to IEC 61914:2015, for use up to 131kA peak fault current and retains cables in the event of a short circuit fault. Compatible with cable diameter of 97-109mm and installs direct to the cable tray rung via fixing holes and user-supplied M10 bolts. Insulating spacers and washers sold separately for protection against galvanic corrosion.