Log ind for at handle
Product number:
Inductive Sensor, ATEX category II 2 G, Ex zone 1, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1, Rectangular, height 40 mm, Active face on top, Plastic, PBT‐GF30‐V0, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, Cable length 2 m, Rated switching distance: 60 mm, Non-flush
Download specifikationer
| Name | Value |
|---|---|
| Width sensor | 80 Millimeter |
| Height of sensor | 40 Millimeter |
| Length of sensor | 92 Millimeter |
| Diameter sensor | - MV Millimeter |
| Mechanical mounting condition for sensor | Not flat |
| Switching distance | 60 Millimeter |
| Suitable for safety functions | Yes |
| Type of switch function | - MV |
| Type of switching output | NAMUR |
| Type of electric connection | Cable |
| Number of semiconductor outputs with signalling function | - MV |
| Number of contact energized outputs with signalling function | - MV |
| Number of protected semiconductor outputs | - MV |
| Number of protected contact energized outputs | - MV |
| Type of actuation | Metallic Target |
| Type of interface | - MV |
| Type of interface for safety communication | - MV |
| Construction type housing | Cuboid |
| Coating housing | - MV |
| Cascadable | - MV |
| Category according to EN 954-1 | - MV |
| SIL according to IEC 61508 | None |
| Performance level acc. to EN ISO 13849-1 | Level c |
| Max. output current at protected output | - MV milliampere |
| Supply voltage | - MV Volt |
| Rated control supply voltage Us at AC 50HZ | - MV Volt |
| Rated control supply voltage Us at AC 60HZ | - MV Volt |
| Rated control supply voltage Us at DC | - MV Volt |
| Voltage type | DC |
| Switching frequency | 100 Hertz |
| With monitoring function downstream switching devices | - MV |
| Material housing | Plastic |
| Compression-resistant | No |
| Explosion safety category for gas | ATEX gas-ex-protection, Cat. 2G |
| Explosion safety category for dust | ATEX dust-ex-protection, Cat. 1D |
| Interference resistance to magnetic fields | - MV |
| Customs tarif #: | 85365019900 |
| FEATURES: | Inductive proximity switch Inductive proximity sensor |
| UNIT: | Piece |
| GTIN | 4047101061543 |